About Dust Collector Solenoid Valve
We make available for our clients a comprehensive gamut of Dust Collector Solenoid Valve. The body and bonnet of these valves are constructed using aluminum pressure die cast. Moreover, the pressure rating of these valves is 0.6 bar to 8.5 bar maximum. Defined by industry norms, these valves are defined by industry norms & standards. Other specifications of these valves are tabulated below:
Technical Specification :
|
body and bonnet construction
|
aluminium pressure die cast
|
|
diaphragm
|
nitrile or neoprene (reinforced) p. U
|
|
temperature
|
rated for 80 c max.
for high temperature upto 125 c viton
diaphragm with viton seat can be provided
|
|
pressure rating
|
0. 6 bar to 8. 5 bar max.
|
|
ip 20 (is 2147) solenoid coil
|
general purpose
|
|
ip 65 (is 2147) solenoid coil
|
for waterproof application
|
|
group i, ma, mb & iic (is 2148) solenoid coil
|
for / flame - proof application
|
|
coil rating
|
continuous rated
|
|
voltage
|
24, 48, 110, 220 volts ac, 50 hz. 12, 24, 48, 110, 220 volts dc
|
refer pdf for more details :
Unmatched Reliability and High Flow PerformanceEngineered for demanding dust collection systems, this solenoid valve guarantees rapid pulse response times and robust performance. Its high flow rate and corrosion-resistant epoxy powder-coated body ensure consistent operation in industrial environments, maximizing the efficiency of your pulse jet bag filters and dust collector systems.
User-Friendly Maintenance and Durable DesignBenefit from simplified maintenance, thanks to replaceable diaphragms, coils, and O-rings. The aluminium die-cast structure combines lightweight construction with mechanical strength, while NBR/Viton seals offer dependable service even across temperature extremes. The valve is designed for high durability, boasting over one million operation cycles.
FAQs of Dust Collector Solenoid Valve:
Q: How does the dust collector solenoid valve operate in a pulse jet bag filter system?
A: The solenoid valve operates remotely or electrically (24V DC or 220V AC). Upon receiving an electrical signal, it rapidly opens and releases a burst of pressurized air (response time < 50 ms) through the orifice, cleaning the filter bags effectively.
Q: What is the process for replacing key parts such as the diaphragm or coil?
A: Key components like the diaphragm, coil, and O-rings are designed to be replaceable. To replace them, isolate the valve from power and air supply, remove the body cover, replace the worn part, reassemble, and restore connections. Follow the manufacturers instructions for safe and proper maintenance.
Q: When is it necessary to perform maintenance on this solenoid valve?
A: Regular maintenance is recommended based on the valves cycle count and performance. If you notice delayed response, air leakage, or reduced cleaning effectiveness, inspect and service the diaphragm, coil, or O-rings to restore optimal operation.
Q: Where can this solenoid valve be installed and used?
A: This valve is suitable for both indoor and outdoor dust collection systems, particularly in industrial environments where IP65 ingress protection, fast response, and corrosion resistance are required. Typical applications include pulse jet bag filters and central dust collector setups.
Q: What are the usage benefits of choosing this solenoid valve?
A: Users benefit from high-flow, fast-response actuation, corrosion-resistant construction, and a long service life exceeding one million cycles. The valves threaded BSP port and direct mount design simplify installation, while replaceable parts reduce operating costs and downtime.
Q: How does the valve ensure durability and reliable sealing under diverse conditions?
A: Constructed with epoxy powder-coated aluminium and options for NBR or Viton seals, the valve maintains performance between -20C and +80C. Its Class H coil insulation and IP65 enclosure further safeguard against harsh weather, dust, and moisture.
Send Inquiry
Send Inquiry
Send Inquiry
Send Inquiry
Send SMS
